New Device Proposed For Industrial Measurement of Rolling Bearing Friction Torque

Mateusz Wrzochal; Stanisław Adamczak; Ryszard Domagalski; Grzegorz Piotrowicz; Sylwester Wnuk

doi:10.5545/sv-jme.2022.275

New Device Proposed For Industrial Measurement of Rolling Bearing Friction Torque

Authors

Mateusz Wrzochal Kielce University of Technology, Poland
Stanisław Adamczak Kielce University of Technology, Poland
Ryszard Domagalski Kielce University of Technology, Poland
Grzegorz Piotrowicz Fabryka Lozysk Tocznych-Krasnik S.A., Poland
Sylwester Wnuk Fabryka Lozysk Tocznych-Krasnik S.A., Poland

DOI:

https://doi.org/10.5545/sv-jme.2022.275

Keywords:

rolling bearings, friction torque, industrial measurement, quality control

Abstract

Article presents the general assumptions and the mechanical design of the new device for measuring the friction torque of rolling bearings, as well as preliminary evaluation of the indications on the basis of which further detailed analyses and corrections of the prototype will be made. The device presented in the manuscript is dedicated to quality control as part of its support for rolling bearing plants.

Downloads

Additional Files

Published

2022-10-27

How to Cite

Wrzochal, M., Adamczak, S., Domagalski, R., Piotrowicz, G., & Wnuk, S. (2022). New Device Proposed For Industrial Measurement of Rolling Bearing Friction Torque. Strojniški Vestnik - Journal of Mechanical Engineering, 68(10), 610–622. https://doi.org/10.5545/sv-jme.2022.275