The Measurement of the Wear of Tie Rod End Components

Authors

  • Marek Wozniak Lodz University of Technology, Department of Vehicles and Fundamentals of Machine Design, Poland
  • Adam Rylski Lodz University of Technology, Institute of Materials Science and Engineering, Poland
  • Krzysztof Siczek Lodz University of Technology, Department of Vehicles and Fundamentals of Machine Design, Poland

DOI:

https://doi.org/10.5545/sv-jme.2021.7389

Keywords:

tie rod end, wear degree, finite element method, steering mechanism system

Abstract

This study aimed to determine the wear intensity of the bearing mating with the ball stud in the tie rod end. The course of the vehicle driving during the period between repairs of the steering assembly was assumed. The modelled scheme of cornering was assumed to be close to the real one. The model of steering mechanism allowing determination of the load of the stud of the tie rod end as a function of the steering angle was elaborated and presented. The model of the ball stud was realized and described. The values of wear intensity for components were calculated and presented.

Downloads

Additional Files

Published

2022-02-22

How to Cite

Wozniak, M., Rylski, A., & Siczek, K. (2022). The Measurement of the Wear of Tie Rod End Components. Strojniški Vestnik - Journal of Mechanical Engineering, 68(2), 101–125. https://doi.org/10.5545/sv-jme.2021.7389

Issue

Vol. 68 No. 2 (2022): Strojniški vestnik - Journal of Mechanical Engineering

Section

Archive

License

Copyright (c) 2022 The Authors

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.